Nuevo Koa CUt

The wood used for the Nuevo Koa comes from Hawaii. Koa is becoming increasingly popular in guitar making. Not only because of its unusual grain, but especially because of its good sound characteristics - warm and woody. The sound of Koa sweetens and deepens with time. If you do want to go on stage, the eSonido pickup system will reliably amplify you. Bring a piece of Hawaii home with it!

Main Features:
  •     Nut width: 50mm
  •     Top: Solid koa
  •     Neck: Mahogany, Spanish heel

Spanish heel (construction sample)

Wooden soundhole inlay

Der Jung tuning machine head

Koa back and sides - shapely cutaway & eSonido preamp system

Specs

    ModelNuevo Koa Cut
    Scale65cm
    Nut width50mm
    TopSolid koa
    Back and sidesKoa
    NeckMahogany, Spanish heel
    FretboardArtificial ebony
    BridgeArtificial ebony, with dual drill holes
    Nut and bridgeBone
    Machine headsDer Jung
    Soundhole inlayPearloid
    FinishNatural high-gloss
    StringsRoyal Classics Sonata
    Other featuresIncludes active Artesano eSonido pickup system; Cutaway; Strap pin on    lower side
Recommended retail price€ 679,00
Nuevo Koa Cut
Nuevo Koa Cut

Koa Cut

Decades of Spanish guitar building tradition meets modern and natural design, the Nuevo series by Artesano. Koa is a Hawaiian tonewood. High grades are very rare. They usually sound warm and woody. The sound of koa sweetens and deepens with time.

eSonido Preamp

The eSonido pickup system, which was specially developed for ARTESANO guitars, has a 4-band equalizer in addition to the volume control in order to be able to adapt the output signal to the respective acoustic environment in the best possible way. Good readability and ease of operation were just as important during development as the quickly accessible battery compartment next to the output jack. Particularly practical for live use: the built-in chromatic tuner. The notch filter also allows unwanted feedback to be eliminated in a matter of seconds.

Instruction manual